|
|
Post by bullitr on Mar 10, 2012 23:06:00 GMT -8
I want to convert A 120 gallon tank to be my new sump
The problem is how to do precission cut for the insert ?
Can I rent a high powered router ?
|
|
|
|
Post by robexcoral on Mar 11, 2012 6:54:36 GMT -8
i have a table saw if ull like to come out to simi ill help u cut it
|
|
|
|
Post by robexcoral on Mar 11, 2012 6:55:50 GMT -8
i have extra acyrlic too
|
|
|
|
Post by bullitr on Mar 11, 2012 14:08:40 GMT -8
I have a table saw too but the cut on those are not precise.
|
|
|
|
Post by chefzilla on Mar 11, 2012 14:27:54 GMT -8
Take them to a acrylic shop. You give them the dimensions they will cut it for you. You can go to either plastic depot in burbank or theres a place thats next to where aquarium city in north hollywood. They will cut it as well
|
|
|
|
Post by bullitr on Mar 11, 2012 18:17:55 GMT -8
Plastic depot don't cut the thick acrylic that the have in scrap at least
But I will ask them if they can for custom dimension
|
|
|
|
Post by euphoricgear on Mar 17, 2012 16:11:51 GMT -8
Remember to use a finer teeth saw bit. Also cut outside the line, cutting on the line would make it smaller sometimes.
|
|
|
|
Post by detane on Mar 17, 2012 23:27:43 GMT -8
Measure twice, cut once.
|
|
